1963-1972 | C10 K5 | 2"/3" | 2" Front Drop Coils 3" Rear Drop Coils

1963-1972 | C10 K5 | 2"/3" | 2" Front Drop Coils 3" Rear Drop Coils
Click to enlarge

Product ID : 351120_371130



This kit includes a pair of 2" lowering springs Front & 3" lowering springs Rear.  Our springs are wound from the highest quality spring material available. Hot wound springs are quenched and tempered. Both hot and cold wound springs are stress relieved in a continuous oven, shot peened to increase fatigue life, and set removed to guaranty the springs do not sag over time. We have state of the art load testing capabilities to ensure that the coil springs conform to the required load and rate specifications. All our coils are powder coated a gunmetal grey. Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is applied electrostatically and is then cured under heat to allow it to flow and form a "skin".  The powder coat creates a hard finish that is tougher than conventional paint so that it does not wear rust or chip like conventional paint. Do not be fooled by other companies selling cheap made springs that are painted and sag and will break after time!

100% No Sag guarantee!

Any Questions or Concerns 




  •     2" Front Lowering Springs
  •    3" Rear Lowering Springs


  •    1965-1972 C10 Pick-Up
  •    1967-1972 K-5 Blazer 2WD


Product Reviews

Login or Register to write the first review.

Products You May Like

5" Flip Kit
2007-2016 3"/5" Lowering Kit
1/2 Drop 1" Drop Coils 2" Drop Hangers
2015 - 2016 2" Front 4" Rear Lowering Kit
C10 K-5 5" Rear Lowering Flip Kit